Featured Products
-
Optical Fiber Heat Shrinkable Cable Splice Protection 60mm Heat Shrink Tube Protective Sleeve
The Ribbon Fiber Splice Sleeve is mainly suitable for optical fibers with multiple cores. According to the number of cores, it can be divided into 4 cores, 8 cores, and 12 cores. By reinforced ceramic rods, fusion tube and cross-linked polyolefin composition, can rebuild the cladding of the fiber and can provide good mechanical strength, in the joint guarantee good optical transmission performance.
-
Optical Fiber Heat Shrinkable Cable Splice Protection 60mm Heat Shrink Tube Protective Sleeve
The Ribbon Fiber Splice Sleeve is mainly suitable for optical fibers with multiple cores. According to the number of cores, it can be divided into 4 cores, 8 cores, and 12 cores. By reinforced ceramic rods, fusion tube and cross-linked polyolefin composition, can rebuild the cladding of the fiber and can provide good mechanical strength, in the joint guarantee good optical transmission performance.
-
100% Original Dual Core Plastic Sc/APC to Sc/APC Duplex Fiber Optic Adapter
Optical fiber adapter (also known as flange),is the centering connection part of optical fiber movable connector, a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. Fiber optic adapters are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection.
By linking two connectors precisely, Fiber Optic Adaptor allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time,Fiber Cable Adapter have the merits of low insertion loss, good interchangeability and reproducibility.Widely used in optical fiber distribution frame (ODF), optical fiber communication equipment, instruments, etc., superior performance, stable and reliable.
-
Good quality FTTH Sc Upc Fiber Quick Connector
Optical fiber adapter (also known as flange),is the centering connection part of optical fiber movable connector, a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. Fiber optic adapters are used in fiber optic connection, the typical use is to provide a cable to cable fiber connection.
By linking two connectors precisely, Fiber Optic Adaptor allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time,Fiber Cable Adapter have the merits of low insertion loss, good interchangeability and reproducibility.Widely used in optical fiber distribution frame (ODF), optical fiber communication equipment, instruments, etc., superior performance, stable and reliable.
-
Discount wholesale Gcabling High Quality Tray 12 24 Fiber Optic Splice Tray
Fiber Optic Splice Tray is used for optic fiber management, storage and fiber optic fusion protection, easy for installation movement. The fusion splice tray expands fiber splice capabilities as well as provides the splicing location for fiber optic cables. It can be put into the fiber distribution frame, fiber optic splice closure, fiber optic termination box etc.
-
PriceList for Fully Stocked Wall Mount Type Indoor Plastic 12 Core FTTH Distribution Terminal Box
FTTH Fiber Socket Panel is termination product in FTTH indoor application.
Used in home or work area.
Provide users with optical access or data access. -
High definition PMMA Fiber Optical Patch Cord Hfbr-4506 Hfbr-4516
FIBER OPTIC PATCH CORD-MM(OM2, OM3, OM4)
A patch cord is a fiber optic cable used to attach one device to another for signal routing. Normally, there are 4 types connector: FC/SC/LC/ST.. 2types ferrule: PC, UPC.
FC stands for Fixed Connection. It is fixed by way of threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated.
-
Personlized Products Gcabling Fiber Optical Splice Nap Box Access Terminal IP68 Fdb Junction Connection Termination Optic FTTH Closure Distribution Splitter Box
Specification:
a.High impact plastic, standard user interface b.Suitable for 1×4,1×8 PLC splitter
c .Anti-UV,shocking resistance d.Wall mount
e.Unique middle panel≥180°,clear area for splicing and distribution, less cross-connection for cables
Technical data
lFiber bend radius:≥40mm
lSplice tray excess loss：≤0.01dB
l Temperature Range : – 40℃ + 60℃
l Anti lateral pressure : ≥2000N / 10 cm
lShock resistance：≥20N.m
SAMPLE FREE,JUST CONTACT US ~
-
Factory Promotional 40mm 12 Core Ribbon Fiber Optic Fusion Splicing Protection Sleeve with Double Ceramics
The Ribbon Fiber Splice Sleeve is mainly suitable for optical fibers with multiple cores. According to the number of cores, it can be divided into 4 cores, 8 cores, and 12 cores. By reinforced ceramic rods, fusion tube and cross-linked polyolefin composition, can rebuild the cladding of the fiber and can provide good mechanical strength, in the joint guarantee good optical transmission performance.
-
Bottom price Copper Hourglass Sleeves, Self Colored for Wire Rope Connecting
The Ribbon Fiber Splice Sleeve is mainly suitable for optical fibers with multiple cores. According to the number of cores, it can be divided into 4 cores, 8 cores, and 12 cores. By reinforced ceramic rods, fusion tube and cross-linked polyolefin composition, can rebuild the cladding of the fiber and can provide good mechanical strength, in the joint guarantee good optical transmission performance.
-
Leading Manufacturer for 24 Port Cat5e/CAT6 FTP Patch Panel
Optical Fiber Patch Panel is an auxiliary equipment for terminal wiring in optical fiber transmission communication network, suitable for direct and branch connection of indoor optical cables, and protects optical fiber joints. The fiber optic cable terminal box is mainly used for the fixing of the fiber optic cable terminal, the splicing of the fiber optic cable and the pigtail, and the storage and protection of the remaining fiber.
Rack-Mount Fixed Fiber Patch Panels are 19’’ inch size and Modular design fit for Rack Mount. The Fiber Patch Panel comes with a number of cable management devices for organizing cables entering and exiting the panel. This Fiber Distribution Frame are equipped with slack-fiber storage spools,cable fix seat and Splicing tray. Each Fiber Optic Distribution Frame features front and rear removable metal covers for quick and easy installation and maintenance. And the cover is fixed by screw.its simple structure and the better costly choice.
-
Best quality Fiber Optic FTTH Tool Kit with Fiber Cleaver and Optical Power Meter
FTTH Tool kits, upgrade kit with tool bag, not afraid of scraping and grinding, large space in waterproof bag, very convenient.
Optic fiber tool included FC-6S metal fiber cutter (24 knife one-sided, automatic return knife)This FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
