Wholesale China Fiber Sleeves Splicing Factory Supplier – Micro Fiber Optic Sleeve For 250um bare fiber – HTLL

Micro Optical Fiber Sleeve is Suitable for bare optical fibers with a diameter of 250 µm.designed specifically for use in optical splitter/coupler or similar packages, with an after shrink diameter of 1.4mm. Stock lengths are 30 & 35mm, but also available in 25, 40mm. This fiber Splice Sleeve is made by hot-melt adhesive – Ethylene Vinyl Acetate (EVA) or Polyethylene (PE) – internally and by irradiation cross-linked polyolefin heat shrinkable tubing externally. There also is a reinforcing pin made by deburred and polished stainless steel. The tubes are clear to allow viewing of the fiber during and after splicing. Fiber Optic Sleeve entire assembly is designed to ensure that all members maintain perfect alignment during shipping, handling and shrinking. .Please refer to the picture below:

● RoHS & REACH Compliant
● Outer tube meets SAE AMS-DTL- 23053/5 Class 2
● Inner EVA meltable adhesive tube
● SUS304 Stainless steel rod
● Full length strength member for total fiber support
● Close dimensional tolerances
● Open ended assembly minimizing the possibility of air entrapment during heat shrinking
● Operating Temperature Range -55°C to +110°C
● Customzied av
● Packaged in 100 per bag

Features

● Fusion splice protector sleeve Have good performance of moisture-proof and environmental protection.
● Transparent sleeve can connect better before shrinking。
● Fiber heat shrink tube easy to use, and avoid the damage to the optical fiber during the installation process.