Products
-
FTTH Fiber Fusion splice Sleeve for drop cable
FTTH Drop Cable Fiber Sleeve Suitable for Splicing of drop fiber and drop fiber. Which mainly contains three parts: heat-shrinkable tube, hot-melt tube and stainless steel needle. The Fiber Optic Cable Protection Sleeve is a specially designed optical fiber splice protection element composed of cross-linked polyolefin, heat shrinkable tube and reinforced stainless steel wire. It can improve the mechanical strength of the optical fiber fusion splice, protect the splice, and ensure the reliability of the splicing. Before shrinking the fusion splice protection sleeves, the transparent outer layer can be used to detect whether the light splicing part is connected correctly, so that the optical fiber can be assembled easily and safely, and provide protection. After shrinking, the transmission characteristics of the optical fiber can be maintained. Provide strength and protection.According to the number of reinforcing cores, it can be divided into single pin and double pin Smoove fiber optic splice.
-
12F Ribbon Fiber optical Splice Sleeve
The Ribbon Fiber Splice Sleeve is mainly suitable for optical fibers with multiple cores. According to the number of cores, it can be divided into 4 cores, 8 cores, and 12 cores. By reinforced ceramic rods, fusion tube and cross-linked polyolefin composition, can rebuild the cladding of the fiber and can provide good mechanical strength, in the joint guarantee good optical transmission performance.
-
Clear Single Core Heat Shrink Optic Fiber Splice Protector
A specially designed cross-linked Fiber Heat Shrink Sleeve, with fusion tubing liner, providing SS304 strength member and protection to fiber optic splices.
Applications It is used to protect the node when the optical fiber is connected to the optical fiber.
Fiber sleeve is Optical fiber splicing protection component that does not affect the light guide characteristics of the optical fiber. It can protect the connection point and improve the mechanical strength. The operation is simple, reducing the risk of damaging the optical fiber during installation. The transparent sleeve of splice protectors makes the fiber connection status clear at a glance.
The sealing structure of splice protection sleeve makes the connection have good temperature and humidity resistance.
-
2.0mm SX MM Fiber Optic Patch cord
FIBER OPTIC PATCH CORD-MM(OM2, OM3, OM4)
A patch cord is a fiber optic cable used to attach one device to another for signal routing. Normally, there are 4 types connector: FC/SC/LC/ST.. 2types ferrule: PC, UPC.
FC stands for Fixed Connection. It is fixed by way of threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated.
-
Hot sales FTTH Fiber Optic Tool Kits
FTTH Tool kits, upgrade kit with tool bag, not afraid of scraping and grinding, large space in waterproof bag, very convenient.
Optic fiber tool included FC-6S metal fiber cutter (24 knife one-sided, automatic return knife)This FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.
-
Best sales Fiber Optic Cleaners pen
This Fiber Optic One Click Cleaner Pen is very simple Fiber Cleaner Tools to use and you can continue to get high-quality cleaning results.
Can clean the end face of 800 or more optical fibers.
Fiber Optic Cleaner Material: antistatic resin.
LC/SC/FC/ST One Touch Cleaning Tool Cleanliness is 95% or higher.
1.25mm and 2.5mm Fiber Cleaning Pen for Water and oil cleaning effect is better than traditional cotton swabs.
One-Click Fiber Optic Connector Cleaner Pen Available in 2.5mm (SC / FC / ST washable) and 1.25mm (LC / washable MU) sizes.
LC Connectors Fiber Optic Tool Easy to use, carry and launch.
Cleaner Tool 2.5mm Universal Connector Fiber Optic Cleaning Pen After the cleaning is completed, a “click” sound will be issued.
-
3.0mm G652D Fiber Optic Patch cord
A patch cord is a fiber optic cable used to attach one device to another for signal routing. Normally, there are 4 types connector: FC/SC/LC/ST.. 3types ferrule: PC, UPC, APC…
FC stands for Fixed Connection. It is fixed by way of threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated.
-
FTTA jumper-PDLC-DLC Fiber Outdoor Patch cord
Good mechanical and environmental characteristics;
Flame retardant characteristics meet the requirements of relevant standards;
The mechanical characteristics of jacket meet the requirements of relevant standards;
Soft, flexible, water blocked, UV resistant, easy to lay and splice, and with big capacity data transmission;
Meet various requirements of market and clients。
-
Fiber Optical Half round Spool
Fiber half spool is a device for manage the optical cables. Its usually used in fiber optic terminal box,ODF,Fiber distribution box. The Fiber Optic Half spool can ensures the curvature radius of the fiber cable.it can make the box more tidy and Reduce the bending radius of the optical fiber, protect the optical fiber from crease, and reduce the loss. The material of Half round spool is Flame retardant ABS,the color usually is gray or black and also can be customized in other colors.
It belongs to Fiber FTTH Accessories, fiber management, Ftth Accessories.
Cable Accessories, Fiber Optic Accessories, Fiber Optic Accessory.
-
Fiber Splice tray
Fiber Optic Splice Tray is used for optic fiber management, storage and fiber optic fusion protection, easy for installation movement. The fusion splice tray expands fiber splice capabilities as well as provides the splicing location for fiber optic cables. It can be put into the fiber distribution frame, fiber optic splice closure, fiber optic termination box etc.
-
SC/APC Simplex Fiber optic Loopback
● Low insertion loss, High return loss
● User friendly, Compact size
● PVC or LSZH Jacket
● PC/UPC/APC polish
● Good exchangeability and repeatability
● Comply with Telcordia GR-326-CORE Specification
● 100% functionally tested guaranteeing performance and integrity
● Compatible with Fast Ethernet, Fiber Channel, ATM, and Gigabit Ethernet
● The fiber G657.A1 ,G657.A2 Can be choose. 0.9mm or 2.0mm
-
Rack-Mount Fiber Optic Sliding Patch Panel
Regarding Rack-Mount Fiber Optic Sliding Patch Panel, It is used for cable terminal, fixed, asylum and protection of fiber and pigtail splice and the remaining fiber, 19” inch size and Modular design fit for Rack Mount. the forward and backward sliding tray allows installers to access the fiber adapter panels as moves, adds and changes are required. Sliding-Out Rack-Mount Panel Provides a simple, high-density, low profile solution for easy access and management of fiber optic terminations in a IU rack space design.
